Home/Torque Specs/Tesla/Model 3/2023-2023 Standard Range Single Motor RWD/Camshaft Position Sensor

2023-2023 Tesla Model 3 Camshaft Position Sensor Torque Specs

Standard Range Single Motor RWD

The 2023 Tesla Model 3 is equipped with a Standard Range Single Motor RWD engine (RWD). Below you'll find detailed camshaft position sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Camshaft Position Sensor	7	10	—
Cover Bolts	12	16	—
Electrical Connector Bolts	5	7	—
⚠️ Gasket Bolts	15	20	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Mounting Bolts	35	47	—
Sensor Bolts	8	11	—
Sensor Mounting Bolts	8	11	—
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Camshaft Position Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for camshaft position sensor on a 2023-2023 Tesla Model 3?

The primary torque specification for camshaft position sensor on a 2023-2023 Tesla Model 3 is 10 Nm (7 lb-ft).

How many torque specs are there for Tesla Model 3 camshaft position sensor?

There are 9 torque specifications for camshaft position sensor on the 2023-2023 Tesla Model 3 Standard Range Single Motor RWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes