Home/Torque Specs/Tesla/Model 3/2023-2023 Standard Range Single Motor RWD/Transfer Case

2023-2023 Tesla Model 3 Transfer Case Torque Specs

Standard Range Single Motor RWD

The 2023 Tesla Model 3 is equipped with a Standard Range Single Motor RWD engine (RWD). Below you'll find detailed transfer case torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:4 hours

View Labor Time Details →

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	180	244	Use new nut, stake after
Cover Screws	8	11	—
⚠️ CV Bolts	45	61	—
⚠️ CV Joint Bolts	45	61	—
⚠️ Differential Cover Bolts	25	34	Apply RTV sealant
⚠️ Driveshaft Bolts	55	75	—
⚠️ Driveshaft Flange Bolts	15	20	—
Mounting Bolts	20	27	—
⚠️ Transfer Case Bolts	26	35	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transfer Case Torque Specs on Other Vehicles

Acura MDX

2001-2001 3.5L V6

Acura MDX

2002-2002 3.5L V6

Acura MDX

2003-2003 3.5L V6

Acura MDX

2004-2004 3.5L V6

Acura MDX

2005-2005 3.5L V6

Acura MDX

2006-2006 3.5L V6

Common Questions

What is the torque spec for transfer case on a 2023-2023 Tesla Model 3?

The primary torque specification for transfer case on a 2023-2023 Tesla Model 3 is 244 Nm (180 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Tesla Model 3 transfer case?

There are 10 torque specifications for transfer case on the 2023-2023 Tesla Model 3 Standard Range Single Motor RWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes