Home/Torque Specs/Tesla/Model S/2012-2016 85 kWh Dual Motor AWD/Battery Coolant Flush

2012-2016 Tesla Model S Battery Coolant Flush Torque Specs

85 kWh Dual Motor AWD

Applies to 2012, 2013, 2014, 2015, and 2016 Tesla Model S

Labor Time:5 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Battery Hold-Down Bolt	8	11	Do not overtighten
⚠️ Battery Module Bolts	18	25	Follow service manual sequence
⚠️ Battery Terminal Bolts	5	7	Clean terminals
Coolant Line Fittings	11	15	—
Cover Screws	8	11	—
⚠️ Ground Cable Bolt	10	14	—
⚠️ High-Voltage Connector Bolts	7	10	De-energize system first
Mounting Bolts	20	27	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Battery Coolant Flush Torque Specs on Other Vehicles

Kia EV6

2022-2024 GT-Line Dual Motor AWD

BMW i4

2022-2024 eDrive40 Single Motor RWD

Lincoln Aviator Grand Touring

2020-2024 3.0L Twin-Turbo V6 Hybrid

Hyundai Kona Electric

2024-2024 Long Range Single Motor FWD

Mercedes-Benz EQS SUV

2023-2024 580 4MATIC Dual Motor AWD

Audi RS e-tron GT

2022-2024 Dual Motor AWD

Common Questions

What is the torque spec for battery coolant flush on a 2012-2016 Tesla Model S?

The primary torque specification for battery coolant flush on a 2012-2016 Tesla Model S is 11 Nm (8 lb-ft). Note: Do not overtighten

How many torque specs are there for Tesla Model S battery coolant flush?

There are 8 torque specifications for battery coolant flush on the 2012-2016 Tesla Model S 85 kWh Dual Motor AWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes