ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’

2012-2016 Tesla Model S Cylinder Head R&R Torque Specs

85 kWh Single Motor RWD

Applies to 2012, 2013, 2014, 2015, and 2016 Tesla Model S

Labor Time:12 hours
View Labor Time Details β†’

πŸ”§ Torque Values19 specifications

Componentlb-ftNmNotes
1014Tighten in sequence, 3 passes
⚠️
1014Tighten in sequence from center outward, multiple passes
5980Hold cam with wrench on hex
1216β€”
4865TTY - tighten in sequence plus angle
2230Apply anti-seize, work hot-to-cold
⚠️
1520β€”
1825β€”
2027β€”
⚠️
3547β€”
⚠️
2635Use new crush washer
⚠️
2230Tighten with cam lobe pointing away
1825Tighten evenly in sequence
811β€”
1115β€”
912Replace if worn
1825Install with pin/clip to compress
1825Tighten in sequence
710Tighten in sequence
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Cylinder Head R&R Torque Specs on Other Vehicles

Common Questions

What is the torque spec for cylinder head r&r on a 2012-2016 Tesla Model S?

The primary torque specification for cylinder head r&r on a 2012-2016 Tesla Model S is 14 Nm (10 lb-ft). Note: Tighten in sequence, 3 passes

How many torque specs are there for Tesla Model S cylinder head r&r?

There are 19 torque specifications for cylinder head r&r on the 2012-2016 Tesla Model S 85 kWh Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes