Home/Torque Specs/Tesla/Model S/2016-2019 P100D Dual Motor AWD/Connecting Rod Bearings

2016-2019 Tesla Model S Connecting Rod Bearings Torque Specs

P100D Dual Motor AWD

Applies to 2016, 2017, 2018, and 2019 Tesla Model S

Labor Time:8 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Connecting Rod Bolts	33	45	TTY - critical torque plus angle
Cover Bolts	12	16	—
⚠️ Gasket Bolts	15	20	—
Mounting Bolts	20	27	—
⚠️ Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Oil Pan Bolts	9	12	Tighten in sequence
Sensor Bolts	8	11	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Connecting Rod Bearings Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for connecting rod bearings on a 2016-2019 Tesla Model S?

The primary torque specification for connecting rod bearings on a 2016-2019 Tesla Model S is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Tesla Model S connecting rod bearings?

There are 8 torque specifications for connecting rod bearings on the 2016-2019 Tesla Model S P100D Dual Motor AWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes