Home/Torque Specs/Tesla/Model S/2022-2022 Plaid Tri Motor AWD/Steering Angle Sensor

2022-2022 Tesla Model S Steering Angle Sensor Torque Specs

Plaid Tri Motor AWD

The 2022 Tesla Model S is equipped with a Plaid Tri Motor AWD engine (AWD). Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	25	34	—
Cover Screws	8	11	—
Mounting Bolts	20	27	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	75	102	—
⚠️ Rack Mounting Bolts	75	102	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	40	54	Use new cotter pin
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 2022-2022 Tesla Model S?

The primary torque specification for steering angle sensor on a 2022-2022 Tesla Model S is 34 Nm (25 lb-ft).

How many torque specs are there for Tesla Model S steering angle sensor?

There are 12 torque specifications for steering angle sensor on the 2022-2022 Tesla Model S Plaid Tri Motor AWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes