Home/Torque Specs/Tesla/Model X/2015-2019 P100D Dual Motor AWD/Front Main Seal

2015-2019 Tesla Model X Front Main Seal Torque Specs

P100D Dual Motor AWD

Applies to 2015, 2016, 2017, 2018, and 2019 Tesla Model X

Labor Time:8 hours

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	12	16	—
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
Electrical Connector Bolts	5	7	—
⚠️ Gasket Bolts	15	20	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Harmonic Balancer Bolt	133	180	Often TTY, may need impact
⚠️ Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
Oil Pan Bolts	9	12	Front section only
Sensor Bolts	8	11	—
Sensor Mounting Bolts	8	11	—
⚠️ Timing Cover Bolts - 10mm	33	45	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Front Main Seal Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for front main seal on a 2015-2019 Tesla Model X?

The primary torque specification for front main seal on a 2015-2019 Tesla Model X is 16 Nm (12 lb-ft).

How many torque specs are there for Tesla Model X front main seal?

There are 13 torque specifications for front main seal on the 2015-2019 Tesla Model X P100D Dual Motor AWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes