Home/Torque Specs/Tesla/Model Y/2021-2021 Standard Range Single Motor RWD/Harmonic Balancer

2021-2021 Tesla Model Y Harmonic Balancer Torque Specs

Standard Range Single Motor RWD

The 2021 Tesla Model Y is equipped with a Standard Range Single Motor RWD engine (RWD). Below you'll find detailed harmonic balancer torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	12	16	—
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Gasket Bolts	15	20	—
⚠️ Harmonic Balancer Bolt	133	180	Often TTY, may need impact \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Mounting Bolts	20	27	—
⚠️ Mounting Bolts	35	47	—
Sensor Bolts	8	11	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Harmonic Balancer Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for harmonic balancer on a 2021-2021 Tesla Model Y?

The primary torque specification for harmonic balancer on a 2021-2021 Tesla Model Y is 16 Nm (12 lb-ft).

How many torque specs are there for Tesla Model Y harmonic balancer?

There are 7 torque specifications for harmonic balancer on the 2021-2021 Tesla Model Y Standard Range Single Motor RWD, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes