Home/Torque Specs/Tesla/Roadster/2008-2012 Single Motor RWD/Variable Valve Timing Actuator

2008-2012 Tesla Roadster Variable Valve Timing Actuator Torque Specs

Single Motor RWD

Applies to 2008, 2009, 2010, 2011, and 2012 Tesla Roadster

Labor Time:8 hours

🔧 Torque Values14 specifications

Component	lb-ft	Nm	Notes
⚠️ Cam Phaser Bolt	48	65	Apply threadlocker, hold cam stationary
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
Cover Bolts	12	16	—
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
Electrical Connector Bolts	5	7	—
⚠️ Gasket Bolts	15	20	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Mounting Bolts	35	47	—
Sensor Bolts	8	11	—
Sensor Mounting Bolts	8	11	—
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence
VVT Solenoid Bolt	7	10	—
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Variable Valve Timing Actuator Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for variable valve timing actuator on a 2008-2012 Tesla Roadster?

The primary torque specification for variable valve timing actuator on a 2008-2012 Tesla Roadster is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Tesla Roadster variable valve timing actuator?

There are 14 torque specifications for variable valve timing actuator on the 2008-2012 Tesla Roadster Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes