Home/Torque Specs/Toyota/4Runner/1990-1990 2.7L I4/Transmission Speed Sensor - Input

1990-1990 Toyota 4Runner Transmission Speed Sensor - Input Torque Specs

2.7L I4

The 1990 Toyota 4Runner is equipped with a 2.7L inline-4 engine. Below you'll find detailed transmission speed sensor - input torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.1 hours

View Labor Time Details →

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Drain Plug	26	35	Use new washer
⚠️ Fill Plug	26	35	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	21	28	—
⚠️ Mounting Bolts	47	64	—
⚠️ Mounting Bolts	47	64	—
⚠️ Pan Bolts	13	17	—
⚠️ Pan Bolts	13	18	Torque in sequence
Sensor Bolts	8	11	—
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Speed Sensor - Input Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission speed sensor - input on a 1990-1990 Toyota 4Runner?

The primary torque specification for transmission speed sensor - input on a 1990-1990 Toyota 4Runner is 11 Nm (8 lb-ft).

How many torque specs are there for Toyota 4Runner transmission speed sensor - input?

There are 13 torque specifications for transmission speed sensor - input on the 1990-1990 Toyota 4Runner 2.7L I4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View Battery Specs