Home/Torque Specs/Toyota/4Runner/2021-2021 4.0L V6/Transfer Case Encoder Motor

2021-2021 Toyota 4Runner Transfer Case Encoder Motor Torque Specs

4.0L V6

The 2021 Toyota 4Runner is equipped with a 4.0L V6 engine. Below you'll find detailed transfer case encoder motor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:4 hours

View Labor Time Details →

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
Cover Screws	9	12	—
⚠️ CV Bolts	52	70	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	23	31	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transfer Case Encoder Motor Torque Specs on Other Vehicles

Cadillac Escalade

2007-2007 6.2L V8

Cadillac Escalade

2008-2008 6.2L V8

Cadillac Escalade

2009-2009 6.2L V8

Cadillac Escalade

2010-2010 6.2L V8

Cadillac Escalade

2011-2011 6.2L V8

Cadillac Escalade

2012-2012 6.2L V8

Common Questions

What is the torque spec for transfer case encoder motor on a 2021-2021 Toyota 4Runner?

The primary torque specification for transfer case encoder motor on a 2021-2021 Toyota 4Runner is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Toyota 4Runner transfer case encoder motor?

There are 7 torque specifications for transfer case encoder motor on the 2021-2021 Toyota 4Runner 4.0L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs