Home/Torque Specs/Toyota/Sequoia/2001-2007 4.7L V8/Transfer Case Fluid Change

Transfer Case Fluid Change Torque Specifications

2001-2007 Toyota Sequoia 4.7L V8

Labor Time:4.8 hours

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	180	244	Use new nut, stake after
⚠️ CV Bolts	45	61	—
⚠️ CV Joint Bolts	45	61	—
Cover Screws	8	11	—
⚠️ Differential Cover Bolts	25	34	Apply RTV sealant
⚠️ Driveshaft Bolts	55	75	—
Mounting Bolts	20	27	—
Transfer Case Drain Plug	18	25	—
Transfer Case Fill Plug	18	25	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transfer Case Fluid Change Torque Specs on Other Vehicles

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Subaru Impreza WRX STI

2004-2007 2.5L H4 Turbo

Subaru Legacy

2015-2019 2.5L H4

Lexus GX 470

2003-2009 4.7L V8

Common Questions

What is the torque spec for transfer case fluid change on a 2001-2007 Toyota Sequoia?

The primary torque specification for transfer case fluid change on a 2001-2007 Toyota Sequoia is 244 Nm (180 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Toyota Sequoia transfer case fluid change?

There are 10 torque specifications for transfer case fluid change on the 2001-2007 Toyota Sequoia 4.7L V8, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes