Home/Torque Specs/Toyota/Sequoia/2008-2022 5.7L V8/Upper Control Arm - Front

2008-2022 Toyota Sequoia Upper Control Arm - Front Torque Specs

5.7L V8

Applies to 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, and 2022 Toyota Sequoia

Labor Time:1.9 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	88	119	Use new cotter pin
Ball Joint Nut	88	119	Use new cotter pin
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Mounting Bolts	27	37	—
Mounting Bolts	27	37	—
⚠️ Strut Bolts	115	156	—
Strut Bolts	115	156	—
⚠️ Strut Tower Nuts	37	50	—
Strut Tower Nuts	37	50	—
⚠️ Sway Bar Link	61	83	—
Sway Bar Link	61	83	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	135	183	Torque in star pattern
Wheel Lug Nuts	135	183	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm - Front Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for upper control arm - front on a 2008-2022 Toyota Sequoia?

The primary torque specification for upper control arm - front on a 2008-2022 Toyota Sequoia is 119 Nm (88 lb-ft). Note: Use new cotter pin

How many torque specs are there for Toyota Sequoia upper control arm - front?

There are 16 torque specifications for upper control arm - front on the 2008-2022 Toyota Sequoia 5.7L V8, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes