Home/Torque Specs/Toyota/Sequoia/2015-2015 5.7L V8/Manifold Absolute Pressure Sensor

2015-2015 Toyota Sequoia Manifold Absolute Pressure Sensor Torque Specs

5.7L V8

The 2015 Toyota Sequoia is equipped with a 5.7L V8 engine. Below you'll find detailed manifold absolute pressure sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.6 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	16	22	—
Electrical Connector Bolts	7	9	—
⚠️ Gasket Bolts	20	27	—
⚠️ Gasket Surface Bolts	20	27	Clean mating surfaces
MAP Sensor Screws	2	3	—
⚠️ Mounting Bolts	47	64	—
Sensor Bolts	11	15	—
Sensor Mounting Bolts	11	15	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Manifold Absolute Pressure Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for manifold absolute pressure sensor on a 2015-2015 Toyota Sequoia?

The primary torque specification for manifold absolute pressure sensor on a 2015-2015 Toyota Sequoia is 22 Nm (16 lb-ft).

How many torque specs are there for Toyota Sequoia manifold absolute pressure sensor?

There are 8 torque specifications for manifold absolute pressure sensor on the 2015-2015 Toyota Sequoia 5.7L V8, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs