ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Toyota/Sequoia/2017-2017 5.7L V8/Transfer Case

2017-2017 Toyota Sequoia Transfer Case Torque Specs

5.7L V8

The 2017 Toyota Sequoia is equipped with a 5.7L V8 engine. Below you'll find detailed transfer case torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:4.8 hours

View Labor Time Details →

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	243	329	Use new nut, stake after
Cover Screws	11	15	—
⚠️ CV Bolts	61	82	—
⚠️ CV Joint Bolts	61	83	—
⚠️ Differential Cover Bolts	34	46	Apply RTV sealant
⚠️ Driveshaft Bolts	74	100	—
⚠️ Driveshaft Flange Bolts	15	20	—
Mounting Bolts	27	37	—
⚠️ Transfer Case Bolts	26	35	—
⚠️ Wheel Lug Nuts	135	183	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transfer Case Torque Specs on Other Vehicles

Acura MDX

2001-2001 3.5L V6

Acura MDX

2002-2002 3.5L V6

Acura MDX

2003-2003 3.5L V6

Acura MDX

2004-2004 3.5L V6

Acura MDX

2005-2005 3.5L V6

Acura MDX

2006-2006 3.5L V6

Common Questions

What is the torque spec for transfer case on a 2017-2017 Toyota Sequoia?

The primary torque specification for transfer case on a 2017-2017 Toyota Sequoia is 329 Nm (243 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Toyota Sequoia transfer case?

There are 10 torque specifications for transfer case on the 2017-2017 Toyota Sequoia 5.7L V8, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs