Home/Torque Specs/Toyota/Sequoia/2021-2021 5.7L V8/Coolant Temperature Sensor

2021-2021 Toyota Sequoia Coolant Temperature Sensor Torque Specs

5.7L V8

The 2021 Toyota Sequoia is equipped with a 5.7L V8 engine. Below you'll find detailed coolant temperature sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.6 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Bleed Screw	7	9	Open during fill
Coolant Drain Plug	11	15	—
Drain Petcock	7	9	Hand tight
Fan Bolts	11	15	—
Hose Clamps	2	3	—
⚠️ Housing Bolts	14	18	—
⚠️ Pump Bolts	24	33	Torque in sequence
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Coolant Temperature Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for coolant temperature sensor on a 2021-2021 Toyota Sequoia?

The primary torque specification for coolant temperature sensor on a 2021-2021 Toyota Sequoia is 9 Nm (7 lb-ft). Note: Open during fill

How many torque specs are there for Toyota Sequoia coolant temperature sensor?

There are 9 torque specifications for coolant temperature sensor on the 2021-2021 Toyota Sequoia 5.7L V8, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes | View Battery Specs