Home/Torque Specs/Toyota/Sienna/2004-2010 3.3L V6/Coolant Temperature Sensor

2004-2010 Toyota Sienna Coolant Temperature Sensor Torque Specs

3.3L V6

Applies to 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Toyota Sienna

Labor Time:0.5 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Bleed Screw	5	7	Open during fill
Coolant Drain Plug	11	15	—
Drain Petcock	5	7	Hand tight
Hose Clamps	2	3	—
⚠️ Housing Bolts	10	14	—
⚠️ Pump Bolts	18	24	—
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Coolant Temperature Sensor Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for coolant temperature sensor on a 2004-2010 Toyota Sienna?

The primary torque specification for coolant temperature sensor on a 2004-2010 Toyota Sienna is 7 Nm (5 lb-ft). Note: Open during fill

How many torque specs are there for Toyota Sienna coolant temperature sensor?

There are 8 torque specifications for coolant temperature sensor on the 2004-2010 Toyota Sienna 3.3L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes