Home/Torque Specs/Toyota/Sienna/2011-2020 3.5L V6/Coolant Temperature Sensor

2011-2020 Toyota Sienna Coolant Temperature Sensor Torque Specs

3.5L V6

Applies to 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, and 2020 Toyota Sienna

Labor Time:0.5 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
Bleed Screw	6	8	Open during fill
Bleed Screw	6	8	Open during fill
Coolant Drain Plug	11	15	—
Coolant Drain Plug	11	15	—
Drain Petcock	6	8	Hand tight
Drain Petcock	6	8	Hand tight
Hose Clamps	2	3	—
Hose Clamps	2	3	—
⚠️ Housing Bolts	12	16	—
Housing Bolts	12	16	—
⚠️ Pump Bolts	21	28	—
Pump Bolts	21	28	—
Thermostat Housing Bolts	11	15	—
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern
Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Coolant Temperature Sensor Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for coolant temperature sensor on a 2011-2020 Toyota Sienna?

The primary torque specification for coolant temperature sensor on a 2011-2020 Toyota Sienna is 8 Nm (6 lb-ft). Note: Open during fill

How many torque specs are there for Toyota Sienna coolant temperature sensor?

There are 16 torque specifications for coolant temperature sensor on the 2011-2020 Toyota Sienna 3.5L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes