2011-2018 Volkswagen Jetta Engine Rebuild Torque Specs
2.0L I4
Applies to 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Volkswagen Jetta
🔧 Torque Values25 specifications
| Component | lb-ft | Nm | Notes |
|---|
| 18 | 25 | — |
| 10 | 14 | Tighten in sequence, 3 passes |
| 10 | 14 | Tighten in sequence from center outward, multiple passes |
| 33 | 45 | TTY - critical torque plus angle |
| 12 | 16 | — |
| 133 | 180 | Often TTY - check spec, may require impact |
| 48 | 65 | TTY - tighten in sequence plus angle |
| 5 | 7 | — |
| 22 | 30 | Apply anti-seize, work hot-to-cold |
| 70 | 95 | Often TTY, tighten in star pattern |
| 15 | 20 | — |
| 15 | 20 | Clean mating surfaces |
| 18 | 25 | — |
| 55 | 75 | TTY - tighten in sequence plus angle |
| 35 | 47 | — |
| 26 | 35 | Use new crush washer |
| 9 | 12 | Tighten in sequence |
| 9 | 12 | — |
| 9 | 12 | — |
| 8 | 11 | — |
| 8 | 11 | — |
| 9 | 12 | Replace if worn |
| 18 | 25 | Install with pin/clip to compress |
| 18 | 25 | Tighten in sequence |
| 7 | 10 | Tighten in sequence |
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.
Other Jobs with Torque Specs
Engine Rebuild Torque Specs on Other Vehicles
Common Questions
What is the torque spec for engine rebuild on a 2011-2018 Volkswagen Jetta?
The primary torque specification for engine rebuild on a 2011-2018 Volkswagen Jetta is 25 Nm (18 lb-ft).
How many torque specs are there for Volkswagen Jetta engine rebuild?
There are 25 torque specifications for engine rebuild on the 2011-2018 Volkswagen Jetta 2.0L I4, covering all related fasteners and components.