ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Volvo/S80/2014-2014 3.2L I6/Locking Hub - Auto

2014-2014 Volvo S80 Locking Hub - Auto Torque Specs

3.2L I6

The 2014 Volvo S80 is equipped with a 3.2L inline-6 engine. Below you'll find detailed locking hub - auto torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
Cover Screws	8	11	—
⚠️ CV Bolts	45	61	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	20	27	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Locking Hub - Auto Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for locking hub - auto on a 2014-2014 Volvo S80?

The primary torque specification for locking hub - auto on a 2014-2014 Volvo S80 is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Volvo S80 locking hub - auto?

There are 7 torque specifications for locking hub - auto on the 2014-2014 Volvo S80 3.2L I6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes