2003-2005 Ford Excursion Head Gaskets - Both Torque Specs

6.0L V8 Power Stroke Diesel

Applies to 2003, 2004, and 2005 Ford Excursion

Labor Time:18 hours

Torque Values (17 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	22	16	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Cylinder Head Bolts	119	88	Multi-step + angle
Electrical Connector Bolts	9	7	—
⚠️ Exhaust Manifold Nuts	46	34	—
⚠️ Gasket Surface Bolts	27	20	Clean mating surfaces
⚠️ Intake Manifold Bolts	33	24	—
⚠️ Mounting Bolts	64	47	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Sensor Mounting Bolts	10	7	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
VVT Solenoid Bolt	10	7	—
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for head gaskets - both on a 2003-2005 Ford Excursion?

The primary torque specification for head gaskets - both on a 2003-2005 Ford Excursion is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Ford Excursion head gaskets - both?

There are 17 torque specifications for head gaskets - both on the 2003-2005 Ford Excursion 6.0L V8 Power Stroke Diesel, covering all related fasteners and components.