P2714moderate severityPowertrain
Transmission Shift Solenoid D Intermittent
on 2011 Audi Q7 3.0L Supercharged V6 · AWD
What this code means
Intermittent electrical fault in shift solenoid D.
Symptoms
- Erratic shifting
- Check engine light
- Intermittent harsh shifts
Common causes
- Solenoid connector issue
- Wiring intermittent
- Solenoid sticking
Diagnostic steps
- Wiggle test connector
- Monitor solenoid operation
- Check wiring
Repair notes
Clean connector. Replace solenoid if intermittent.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1