Back to 2007 Chevrolet Impala

2007 CHEVROLET IMPALA

3.5L V6FWDAUTOMATICgas
3 active safety recalls on this vehicle — view recalls
Repairs0Labor479Torque4924Fluid6DTC886Battery1Maintenance0Recalls3
C0131moderate severityChassis

Brake Pad Wear Sensor Circuit Rear

on 2007 Chevrolet Impala 3.5L V6 · FWD

What this code means

The rear brake pad wear sensor indicates pads are worn or the circuit is faulty.

Symptoms

  • Brake pad warning light
  • Service message for rear brakes
  • Reduced braking from rear

Common causes

  • Rear brake pads at minimum thickness
  • Wear sensor wire damaged
  • Connector not reattached after service

Diagnostic steps

  1. Check rear brake pad thickness
  2. Inspect wear sensor wire
  3. Check sensor connector
  4. Measure pad thickness

Repair notes

Replace rear brake pads and wear sensors.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →