P2016
Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
2012-2016 Ferrari FF 6.3L V12 🇬🇧
Low SeverityPowertrain
Description
Low signal from the intake manifold runner position sensor on bank 1.
Symptoms
- Check engine light
- Runs in default mode
Common Causes
- Sensor short to ground
- Wiring damage
- Failed sensor
Diagnostic Steps
- Measure sensor output voltage
- Check wiring for shorts
Repair Notes
Replace position sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2016 on Other Vehicles
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Ferrari 488 GTB
2015-2019 3.9L V8 Twin Turbo
Ferrari 488 Pista
2018-2020 3.9L V8 Twin Turbo
Common Questions
What does code P2016 mean on a 2012-2016 Ferrari FF?
P2016 stands for "Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1". Low signal from the intake manifold runner position sensor on bank 1.
What are the symptoms of P2016 on a Ferrari FF?
Common symptoms of P2016 include: Check engine light, Runs in default mode.
What causes P2016 on a 2012-2016 Ferrari FF?
Common causes of P2016 include: Sensor short to ground, Wiring damage, Failed sensor.