U1000moderate severityNetwork
CAN Communication Bus Fault
on 2014 Subaru BRZ 2.0L H4 · AWD
What this code means
General manufacturer-level CAN bus communication fault detected. Multiple modules may report this code simultaneously.
Symptoms
- Warning lights on
- Multiple communication DTCs
- Intermittent electrical features
- Scan tool intermittent connection
Common causes
- CAN bus wiring damage
- Module failure corrupting bus
- Poor ground connection
- Aftermarket device on CAN bus
- Termination resistor fault
Diagnostic steps
- Check CAN bus resistance (should be ~60 ohms)
- Scope CAN bus signals
- Remove aftermarket devices
- Check all CAN bus connectors
- Isolate modules to find fault source
Repair notes
Systematic CAN bus diagnosis required. Start with bus resistance measurement and visual inspection.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus