P0112low severityPowertrain
IAT Sensor 1 Circuit Low Input
on 2013 Subaru Outback 3.6L H6 · AWD
What this code means
The IAT sensor circuit voltage is lower than expected, indicating a very high temperature or short.
Symptoms
- Check Engine Light
- Rich fuel mixture
- Poor economy
Common causes
- Short to ground in IAT circuit
- Faulty sensor
- Water intrusion in connector
Diagnostic steps
- Test sensor resistance
- Check for shorts to ground
- Inspect connector for moisture
Repair notes
Repair short or replace sensor.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1