P0400moderate severityPowertrain
Exhaust Gas Recirculation (EGR) Flow
on 2013 Subaru Outback 3.6L H6 · AWD
What this code means
The EGR system flow is not within expected parameters.
Symptoms
- Check Engine Light
- Rough idle
- Pinging/knocking
- Increased NOx emissions
- Failed emissions test
Common causes
- Clogged EGR passages
- Faulty EGR valve
- EGR valve stuck closed
- Carbon buildup
- Vacuum line issue
Diagnostic steps
- Test EGR valve operation
- Check EGR passages for carbon buildup
- Test vacuum supply to EGR valve
- Monitor EGR position with scan tool
- Inspect EGR tube
Repair notes
Clean EGR valve and passages. Replace EGR valve if stuck or faulty.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1