Invalid Data Received from Vehicle Dynamics Control Module
1998-2008 Volkswagen Pointer 1.8L I4 🇬🇧
Description
Data from the stability control or yaw rate module is invalid.
Symptoms
- Stability control disabled
- ESC warning light
- Vehicle dynamics system fault
- Traction control off
Common Causes
- Yaw rate sensor calibration lost
- CAN bus noise
- Module partial failure
- Sensor wiring issue
Diagnostic Steps
- Check yaw rate sensor data with scan tool
- Recalibrate yaw rate sensor
- Check CAN bus quality
- Test sensor wiring
- Update module software
Repair Notes
Recalibrate yaw rate sensor. If calibration fails, replace sensor module.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0416 on Other Vehicles
Volkswagen Amarok BR
2010-2025 2.0L I4 TDI Diesel
Volkswagen Amarok BR
2018-2025 3.0L V6 TDI Diesel
Volkswagen Arteon
2019-2024 2.0L Turbo I4
Volkswagen Atlas
2018-2024 2.0L Turbo I4
Volkswagen Atlas
2018-2024 3.6L V6
Volkswagen Atlas Cross Sport
2020-2024 2.0L Turbo I4
Volkswagen Atlas Cross Sport
2020-2024 3.6L V6
Volkswagen Beetle
2012-2019 2.0L Turbo I4
Common Questions
What does code U0416 mean on a 1998-2008 Volkswagen Pointer?
U0416 stands for "Invalid Data Received from Vehicle Dynamics Control Module". Data from the stability control or yaw rate module is invalid.
What are the symptoms of U0416 on a Volkswagen Pointer?
Common symptoms of U0416 include: Stability control disabled, ESC warning light, Vehicle dynamics system fault, Traction control off.
What causes U0416 on a 1998-2008 Volkswagen Pointer?
Common causes of U0416 include: Yaw rate sensor calibration lost, CAN bus noise, Module partial failure, Sensor wiring issue.