2008-2022 Toyota Sequoia Steering Angle Sensor Torque Specs

5.7L V8

Applies to 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, and 2022 Toyota Sequoia

Labor Time:1.2 hours

Torque Values (22 specifications)

Component	Nm	lb-ft	Notes
⚠️ Coupling Bolt	46	34	—
Coupling Bolt	46	34	—
Cover Screws	15	11	—
Cover Screws	15	11	—
Mounting Bolts	37	27	—
Mounting Bolts	37	27	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	137	101	—
Rack Bolts	137	101	—
Rack Mounting Bolts	137	101	—
⚠️ Rack Mounting Bolts	137	101	—
Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	73	54	Use new cotter pin
Tie Rod End Nut	73	54	Use new cotter pin
⚠️ Tie Rod Nut	73	54	—
Tie Rod Nut	73	54	—
⚠️ Wheel Lug Nuts	183	135	—
Wheel Lug Nuts	183	135	—

The primary torque specification for steering angle sensor on a 2008-2022 Toyota Sequoia is 46 Nm (34 lb-ft).

There are 22 torque specifications for steering angle sensor on the 2008-2022 Toyota Sequoia 5.7L V8, covering all related fasteners and components.