P2716high severityPowertrain
Transmission Shift Solenoid D Performance/Stuck Off
on 2006 Subaru Legacy 2.5L H4 · AWD
What this code means
Shift solenoid D is not responding to commands.
Symptoms
- Stuck in one gear
- No upshift/downshift
- Limp mode
Common causes
- Clogged solenoid
- Mechanical failure
- Contaminated fluid
- Low fluid pressure
Diagnostic steps
- Check fluid condition
- Command solenoid actuation
- Check hydraulic pressure
Repair notes
Flush transmission and replace solenoid. Check for debris.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1