Brake Lamp Switch Circuit 2 Malfunction
2024-2024 Tesla Model 3 Standard Range Single Motor RWD
The 2024 Tesla Model 3 is equipped with a Standard Range Single Motor RWD engine (RWD). Below you'll find detailed c0096 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The secondary or redundant brake lamp switch input to the ABS/stability module is faulty.
Symptoms
- ABS light on
- Stability control disabled
- Cruise control inoperative
- Brake light inconsistency detected
Common Causes
- Secondary brake switch failure
- Wiring fault in redundant circuit
- ABS module input fault
- Switch adjustment incorrect
Diagnostic Steps
- Test both brake switch circuits
- Compare primary and secondary switch signals
- Adjust switch if out of specification
- Inspect wiring to ABS module
- Check both switch inputs at module connector
Repair Notes
Adjust or replace secondary brake lamp switch.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0096 on Other Vehicles
Tesla Cybertruck
2024-2024 Cyberbeast Tri Motor AWD
Tesla Cybertruck
2024-2024 Dual Motor AWD
Tesla Cybertruck
2024-2024 Single Motor RWD
Tesla Model 3
2017-2017 Long Range Dual Motor AWD
Tesla Model 3
2017-2017 Performance Dual Motor AWD
Tesla Model 3
2017-2017 Standard Range Plus Single Motor RWD
Tesla Model 3
2018-2018 Long Range Dual Motor AWD
Tesla Model 3
2018-2018 Performance Dual Motor AWD
Common Questions
What does code C0096 mean on a 2024-2024 Tesla Model 3?
C0096 stands for "Brake Lamp Switch Circuit 2 Malfunction". The secondary or redundant brake lamp switch input to the ABS/stability module is faulty.
What are the symptoms of C0096 on a Tesla Model 3?
Common symptoms of C0096 include: ABS light on, Stability control disabled, Cruise control inoperative, Brake light inconsistency detected.
What causes C0096 on a 2024-2024 Tesla Model 3?
Common causes of C0096 include: Secondary brake switch failure, Wiring fault in redundant circuit, ABS module input fault, Switch adjustment incorrect.
Last updated: March 2026