🚨 2025 Audi A4: Emergency Neutral
The 2025 A4 represents the next-generation platform (B10) with an updated electronic shifter design.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and apply the parking brake firmly.
- Turn the ignition to ON position if possible (even with dead battery, try key in ignition).
- Look for the shift lock override access point near the shifter base - it may be under a small cover on the left or right side of the shifter surround, or integrated into the center console trim.
- Use a flathead screwdriver or similar tool to gently pry off any protective cover cap if present.
- Insert a small rigid tool (screwdriver, key, or Audi emergency tool if provided) into the override slot.
- While pressing down firmly on the override, press the brake pedal and attempt to move the shifter to Neutral.
- If the shifter will not release even with override, the vehicle may require temporary 12V power to energize the electronic shifter mechanism.
Shift-lock override location
Override location on new B10 platform should be near the shifter base, likely on the left side of the surround or within the console trim; consult owner's manual for exact location as this is a new generation
With zero electrical power
With zero power, the next-generation electronic shifter may remain locked. A temporary 12V jump is typically required. If no power source is available and override does not work, the vehicle must be loaded without neutral engagement using dollies or flatbed.