🚨 2013 Audi R8: Emergency Neutral
The 2013 R8 with automatic transmission (R tronic automated manual) uses a center console-mounted sequential shift lever.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and the vehicle is on level ground.
- Turn the ignition to ON position (or ACC if battery has minimal charge).
- Firmly depress and hold the brake pedal.
- Locate the shift lock override slot on the center console—look for a small rectangular cap near the shift lever base, typically positioned forward or to the right side of the lever.
- Remove the override cap using a flat-blade screwdriver or the metal key blade.
- Insert the tool into the override slot and press down firmly while simultaneously moving the shift lever from P to N.
- Once in N, release the brake pedal and confirm the parking brake is holding the vehicle.
- Replace the override cap after shifting.
Shift-lock override location
Small rectangular capped slot near the shift lever base on the center console, typically positioned forward or to the right of the lever
With zero electrical power
The R tronic transmission requires at least minimal electrical power (ignition in ACC or ON position) for the shift lock override to function. With a completely dead battery, connect a jump box or jump start the vehicle first to restore 12V power to the system. Without any electrical power, the shift interlock cannot be released and the vehicle must be flatbed towed in the locked position.