🚨 2006 Buick Rendezvous: Emergency Neutral
The 2006 Rendezvous uses a traditional console-mounted floor shifter with electronic shift interlock tied to the brake pedal and ignition position.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly set and wheels are chocked.
- Turn the ignition key to the ACC or ON position (not START) if battery power is available.
- Firmly press and hold the brake pedal.
- Locate the shift lock release slot: it is a small rectangular opening in the shifter console, typically covered by a removable cap or trim piece on the left side of the shifter base near the driver.
- Remove the cap by prying gently with a flat-blade screwdriver or your fingernail.
- Insert a small flat-blade screwdriver, key, or similar tool into the release slot and press down firmly while simultaneously moving the shifter out of Park.
- If successful, shift to Neutral and proceed with towing or moving the vehicle.
Shift-lock override location
Small rectangular slot on the left side of the shifter base near the driver, usually covered by a removable plastic cap.
With zero electrical power
With no battery power, the ignition cannot be turned to ACC/ON. Use the shift lock release override slot as described—mechanical override does not require electrical power. However, without power the steering wheel will be locked; you may need to apply slight turning pressure to the wheel while turning the key to ACC to unlock steering before moving the vehicle.