🚨 2013 Chevrolet Spin: Emergency Neutral
The 2013 Chevrolet Spin uses a traditional floor-mounted console shifter with electronic shift lock controlled by the brake pedal interlock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground and the parking brake is firmly engaged
- Turn the ignition key to the ACC or ON position if battery power is available
- Locate the shift lock override slot, typically found near the shifter base—look for a small covered slot or cap on the console near the shift lever
- Use a flat-blade screwdriver or similar tool to remove the small plastic cap covering the override slot
- Insert the screwdriver or tool into the override slot and press down firmly while simultaneously pulling the shift lever toward you and moving it to Neutral
- If successful, the shift lever should move freely to Neutral position
Shift-lock override location
Near the shifter base on the center console; look for a small plastic cap that can be pried off to access the manual release slot—exact position varies but typically on the right or front side of the shifter housing
With zero electrical power
With completely dead battery, the shift lock override still functions mechanically. You do not need electrical power to use the override slot. Turn the key manually to ACC position (no power needed) to unlock the steering column if needed for towing.