🚨 2024 Ford Edge: Emergency Neutral
The 2024 Ford Edge uses a conventional electronic console-mounted shifter with a button on the side for gear selection.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and apply the parking brake fully.
- Turn the ignition to the ON position (press START button twice without pressing brake pedal) to provide power to the shift lock system if battery has any charge.
- Locate the shift lock override slot: it is covered by a small rectangular cap directly to the left of the shifter base, toward the driver's side.
- Use a flathead screwdriver or similar tool to carefully pry off the override cap.
- Insert the screwdriver or key into the override slot and press down firmly while simultaneously pressing the shifter button and moving the shifter to Neutral.
- If successful, release the override, replace the cap, and the vehicle can now be moved or towed.
- If the vehicle will be towed with rear wheels down, ensure it does not exceed 50 miles or 35 mph per manufacturer guidelines.
Shift-lock override location
Small rectangular cap to the left of the shifter base near the driver's side of the console
With zero electrical power
With completely dead battery, the shift lock override must be used mechanically. The override slot will still function without electrical power. You may need to manually release the electronic parking brake if equipped (EPB) - consult owner's manual for EPB emergency release procedure, which typically involves a tool in the center console storage area.