🚨 2026 McLaren GT: Emergency Neutral
The 2026 McLaren GT uses a center console-mounted sequential-style gear selector lever with electronic shift-by-wire operation.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and parking brake is engaged (if functional)
- If 12V power is available, turn ignition to ON/ACC position
- Locate the shift lock override slot on the center console - typically found near the base of the gear selector, often covered by a small removable cap or trim piece
- Remove the override cap using a small flathead screwdriver or similar tool
- Insert the override tool (emergency key blade or small screwdriver) into the override slot
- Press and hold the override while moving the gear selector to Neutral
- If no electrical power is available, follow the no-power procedure below
Shift-lock override location
Near the base of the center console gear selector, under a small removable cap - exact location may vary; consult owner's manual for precise position
With zero electrical power
With zero 12V power, the electronic shift-by-wire system will not function. You may need to access the transmission directly via the engine bay to manually place it in neutral - this requires specialized knowledge and tools. In most dead-battery scenarios, jump-starting or connecting external 12V power is the recommended approach to enable the shift lock override. Contact McLaren roadside assistance or authorized service center for guidance.