🚨 1999 Subaru Outback: Emergency Neutral
The 1999 Outback uses a floor-mounted console shifter with electronic shift interlock; note that CVT was not available in 1999, this vehicle has a 4-speed automatic.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Set the parking brake and chock the wheels
- Turn the ignition key to the ACC or ON position (if battery has any charge)
- Press the brake pedal fully
- Press the shifter button on the front of the lever and move to Neutral
- If the shifter won't release from Park, locate the shift lock override cover on the console near the shifter base
- Remove the small plastic cover (it may pry off or pull straight up)
- Insert a small flathead screwdriver or similar tool into the override slot underneath
- Press down on the override release while pressing the shifter button and move to Neutral
Shift-lock override location
Small rectangular or circular cover on the console immediately adjacent to the shifter base, typically toward the front or right side of the shifter; the override slot is directly underneath
With zero electrical power
With zero electrical power, you must use the mechanical override. Remove the small cover near the shifter base, insert a screwdriver into the slot, and hold it depressed while pressing the shifter button and moving to Neutral. The ignition position does not matter when using the mechanical override.