C0106moderate severityChassis
Brake Pedal Position Sensor Circuit High
on 1997 Acura RL 3.5L V6 · AWD
What this code means
The brake pedal position sensor voltage exceeds the maximum expected value.
Symptoms
- ABS light on
- Module reads no brake application
- Brake assist may not function
Common causes
- Open circuit in sensor signal wire
- Short to battery voltage
- Faulty sensor
- Connector disconnected
Diagnostic steps
- Test signal voltage at sensor and module
- Check for open circuits
- Inspect connector for damage
- Verify sensor ground connection
Repair notes
Repair open circuit or replace sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent