B2501low severityBody
Rear Wiper Motor Circuit
on 2000 Acura RL 3.5L V6 · AWD
What this code means
Malfunction in the rear windshield wiper motor circuit.
Symptoms
- Rear wiper not moving
- Rear wiper does not park
- Rear wiper intermittent
- Rear washer works but wiper does not
Common causes
- Faulty rear wiper motor
- Wiper switch failure
- Wiring damage in liftgate
- Motor ground fault
- Rear wiper arm seized
Diagnostic steps
- Check rear wiper fuse
- Test motor with direct power
- Inspect wiring at liftgate hinge
- Test rear wiper switch
- Check motor ground
Repair notes
Replace rear wiper motor or repair wiring at liftgate hinge flex point.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit