Free API
3.7L V6AWDAUTOMATICgas
6 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0962high severityPowertrain

Pressure Control Solenoid "A" Control Circuit Low

on 2011 Acura RL 3.7L V6 · AWD

What this code means

The control circuit for pressure control solenoid A shows a voltage lower than expected. This usually indicates a short to ground or an internal solenoid fault.

Symptoms

  • Harsh shifting
  • Transmission slipping
  • Check engine light on

Common causes

  • Short to ground in solenoid wiring
  • Faulty pressure control solenoid
  • Damaged connector
  • Faulty TCM/PCM

Diagnostic steps

  1. Scan and record freeze frame data
  2. Inspect wiring for shorts to ground
  3. Measure solenoid resistance
  4. Repair wiring or replace solenoid

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2011 Acura RL repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Acura RL — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →