Free API
3.7L V6AWDAUTOMATICgas
6 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1077moderate severityPowertrain

IMRC Port Position Sensor Low Voltage

on 2011 Acura RL 3.7L V6 · AWD

What this code means

The intake manifold runner control port position sensor is reading a low voltage signal below the expected range. This affects intake airflow tuning and can hurt performance.

Symptoms

  • Reduced power at high rpm
  • Rough running
  • Check engine light on

Common causes

  • Faulty IMRC position sensor
  • Damaged sensor wiring or connector
  • Stuck intake runner valve
  • Faulty PCM

Diagnostic steps

  1. Scan for stored codes and freeze frame
  2. Check IMRC sensor wiring and connector
  3. Test sensor voltage with scan tool
  4. Inspect intake runner valve operation

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2011 Acura RL repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Acura RL — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →