Back to 2006 Audi A3
Help
2006 AUDI A3
2.0L Turbo I4•FWD•AUTOMATIC•gas•BPY•turbo
4 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor504Torque3220Fluid7DTC1049Battery1Maintenance0Recalls4
U3003moderate severityNetwork

Control Module Calibration Not Complete

on 2006 Audi A3 2.0L Turbo I4 · FWD

What this code means

A module calibration or initialization procedure has not been completed after programming or replacement.

Symptoms

  • Module in default mode
  • System not performing optimally
  • Calibration warning message
  • Adaptive values not learned

Common causes

  • Programming completed but calibration skipped
  • Calibration drive cycle not completed
  • Battery disconnected during calibration
  • Calibration procedure interrupted

Diagnostic steps

  1. Perform required calibration procedure
  2. Complete calibration drive cycle
  3. Run module-specific initialization
  4. Verify calibration parameters stored
  5. Perform post-calibration verification test

Repair notes

Complete the required calibration procedure. Some calibrations require specific driving conditions.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITE
Shop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Network codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2006 Audi A3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi A3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →