U0235moderate severityNetwork
Lost Communication with Cruise Control Front Distance Range Sensor
on 2010 Audi A3 2.0L TDI I4 · FWD
What this code means
Cannot communicate with the forward distance radar or lidar sensor for adaptive cruise.
Symptoms
- Adaptive cruise not available
- Sensor blocked warning
- Forward collision warning off
- Following distance not adjustable
Common causes
- Distance sensor failure
- CAN bus wiring
- Module power loss
- Sensor blocked or misaligned
- Fuse blown
Diagnostic steps
- Check sensor fuse
- Test power and ground
- Check CAN wiring
- Clean sensor face
- Check sensor alignment
- Inspect front bumper area for damage
Repair notes
Clean sensor and check alignment. Requires calibration after bumper or sensor work.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus