2008–2017 Audi A5 2.0L Turbo I4 AWD

Factory-verified torque specs8 values, each checked by hand

Camshaft Bridge Bolts1) 8 Nm. 2) +90 degrees. TTY bolts.6 lb-ft8 Nm

Connecting Rod Bolts1) 30 Nm. 2) +90 degrees.22 lb-ft30 Nm

Control Arm Bolts⚠️ TTY - Always replace. Torque at ride height.52 lb-ft70 Nm

Cylinder Head Bolts1) 40 Nm. 2) +90 degrees. 3) +90 degrees. Use new bolts.30 lb-ft40 Nm

Lower Ball Joint NutsTTY - Always replace.29 lb-ft40 Nm

Main Cap Bolts1) 65 Nm. 2) +90 degrees.48 lb-ft65 Nm

Strut Pinch BoltTTY - Always replace. Spreader tool needed for removal.52 lb-ft70 Nm

Upper Mount NutTTY - Replace.11 lb-ft15 Nm

Fluids & battery

A/C RefrigerantR-134a28 oz

Brake FluidDOT 4 low viscosity1 qt

CoolantVW/Audi G13 coolant8.5 qt

Engine Oil5W-40 full synthetic5.8 qt

Front DifferentialVW/Audi G 052 171 A20.8 qt

Power SteeringVW/Audi G 004 000 M21.1 qt

Rear DifferentialVW/Audi G 052 171 A21.1 qt

Transfer CaseVW/Audi G 052 171 A20.6 qt

Automatic TransmissionVW/Audi G 052 182 A29.5 qt

Washer FluidWindshield washer fluid concentrate6.3 qt

BatteryGroup H8 · Lead Acid800 CCA

Common Problems & Known Issues

The 2008-2017 Audi A5 with the 2.0T engine is a stylish coupe/convertible that shares the reliability issues of early EA888 Gen 1 and Gen 2 engines, particularly catastrophic oil consumption and timing chain problems. These can lead to complete engine failure if not caught early.

Catastrophic Oil Consumption / Piston Ring Failure

Common · high severity

Typical onset: 60,000-120,000 mi

Symptoms: Burning 1+ quart of oil every 1,000 miles, Blue smoke from exhaust on startup or acceleration, Carbon buildup on intake valves causing rough idle and misfires, Check engine light for cylinder misfires

Fix: Piston ring replacement requires engine removal and complete teardown. Early EA888 Gen 1 engines (2008-2012) have defective piston ring design. Many owners end up with full engine rebuilds or short block replacements. 25-35 labor hours.

Estimated cost: $6,000-10,000

Timing Chain Tensioner Failure

Common · high severity

Typical onset: 80,000-150,000 mi

Symptoms: Rattling noise from front of engine on cold start (first 3-5 seconds), Check engine light with cam/crank correlation codes, Engine won't start if chain has jumped, Metallic grinding noise under acceleration

Fix: Tensioner, chain, and guides all need replacement as a set. If chain has jumped, expect bent valves and head work. Engine-out job for thorough access. 12-18 hours labor, more if valve damage occurred.

Estimated cost: $2,500-4,500

Intake Manifold Runner Flaps / Carbon Buildup

Common · medium severity

Typical onset: 70,000-100,000 mi

Symptoms: Rough idle and hesitation, Check engine light P2015 or P2004 codes (manifold runner control), Loss of power, especially low-end torque, Intake manifold flap position errors

Fix: Direct injection engines get heavy carbon buildup on intake valves. Manifold runner control arms break. Requires manifold removal, walnut blasting valves, and often new manifold or repair kit. 6-8 hours labor.

Estimated cost: $1,200-2,200

PCV System Failure / Diaphragm Tear

Common · medium severity

Typical onset: 60,000-90,000 mi

Symptoms: Rough idle and stalling, Excessive oil consumption (different from ring failure pattern), Oil in intake pipes, Whistling or hissing noise from engine bay, Check engine light for lean/rich codes

Fix: PCV valve integrated into valve cover. Diaphragm tears, causing vacuum leaks and oil ingestion. Requires complete valve cover replacement. 3-4 hours labor.

Estimated cost: $600-1,000

Coolant Thermostat Housing Failure

Occasional · medium severity

Typical onset: 70,000-110,000 mi

Symptoms: Coolant leaks from front/side of engine, Check engine light for coolant temp issues, Overheating or engine running too cold, Plastic housing cracks visible near thermostat

Fix: Plastic thermostat housing becomes brittle and cracks. Multiple coolant hoses also age out. Replace housing, thermostat, and associated hoses as preventive. 2-3 hours labor.

Estimated cost: $400-700

Transmission Oil Cooler / Mechatronic Failure

Occasional · high severity

Typical onset: 90,000-140,000 mi

Symptoms: Harsh or delayed shifts, Transmission slipping or refusing to engage gears, Check engine light with transmission codes, Metal shavings in transmission fluid

Fix: S-tronic (dual-clutch) transmission has mechatronic unit failures. Cooler lines also leak internally. Requires mechatronic replacement or complete transmission overhaul. 8-12 hours labor.

Estimated cost: $3,500-6,000

Water Pump Failure

Occasional · high severity

Typical onset: 80,000-120,000 mi

Symptoms: Coolant leak from front of engine, Overheating, Squealing noise from serpentine belt area, Coolant warning light

Fix: Water pump is timing-belt-driven on some variants, timing-chain-area on others. Failure means potential overheating and head gasket damage. Replace pump, timing components, and thermostat together. 6-10 hours labor depending on access.

Estimated cost: $1,500-2,800

Owner tips

Check oil level every 500 miles religiously—oil consumption kills these engines
Use only VW 502.00/504.00 spec oil and change every 5,000 miles maximum despite 10k interval
Walnut blast intake valves every 40,000-50,000 miles to prevent carbon buildup
Listen for timing chain rattle on cold starts—address immediately to avoid catastrophic failure
Budget $1,500/year minimum for unexpected repairs beyond maintenance on higher-mileage examples

Only buy if you have a $5,000+ emergency fund and detailed service records showing timing chain, PCV, and oil consumption addressed—otherwise, high risk of engine failure.

AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.

2008–2017 AUDI A5