🌍 International coverage, work in progress. This European-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2010–2016 AUDI A5

2.0L I4 TDIFWDdieselCAGAturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this A5
Every control module on the 2008-2016 Audi A5 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)3.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission valve body (Multitronic/CVT and S-tronic/DSG) or external on case (Tiptronic)
🔧 VAS 5052/ODIS
⚠️ DSG/S-tronic requires mechatronic removal and transmission oil service. Component protection locked. Tiptronic external TCM is 1.5 hrs.
Central Convenience Control Module (CCM / Comfort Module)1.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind dashboard, left side kick panel or under driver seat
🔧 VAS 5052/ODIS or VCDS
⚠️ Controls windows, locks, lighting. Component protection on some functions. VCDS can perform most coding.
ABS/ESP Control Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VAS 5052/ODIS or VCDS
⚠️ Brake bleeding required after replacement. Coding typically accessible via VCDS for basic functions.
Gateway Control Module (Gateway)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard, left of steering column or center console area
🔧 VAS 5052/ODIS
⚠️ Central CAN hub; replacement requires VIN coding and component protection unlock. Critical for all module communication.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind center dashboard HVAC controls
🔧 VCDS or Autel
⚠️ Automatic climate requires calibration of flap motors after replacement.
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall or under intake manifold depending on engine
🔧 VAS 5052/ODIS or VCDS with component protection unlock
⚠️ Component protection introduced 2009+; immobilizer adaptation required. 2.0T typically under intake, V6 left side accessible.
Steering Column Electronics / Steering Angle Sensor (SAS / J527)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Steering column, under dashboard
🔧 VCDS or Autel
⚠️ Steering angle calibration required after replacement or alignment. Basic relearn via drive cycle or scan tool.
Radio/Navigation Control Module (RNS-E / MMI 2G)1.2 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Behind center dashboard screen/radio unit
🔧 VCDS or Autel
⚠️ MMI 2G (2009+) requires coding for vehicle options. RNS-E (2008-2009) typically plug-and-play. Anti-theft code may be needed.
Instrument Cluster (IC)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 VAS 5052/ODIS
⚠️ Component protection locks mileage/VIN. Mileage transfer requires dealer tool or EEPROM work. Steering wheel removal required.
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Inside door panel, per door (typically front doors only)
🔧 VCDS or Autel
⚠️ Window and mirror calibration required after replacement.
Adaptive Headlight Range Control Module (AFS / Bi-Xenon)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside headlight assembly (per side) or behind dashboard
🔧 VCDS or Autel
⚠️ Headlight aim calibration required. Xenon models have ballast and leveling motor integrated.
Immobilizer/Keyless Access Control Module (Immo / Kessy)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Steering column (immobilizer) or center console (Kessy)
🔧 VAS 5052/ODIS
⚠️ Key programming and ECM pairing required. Component protection locked. All keys must be present for adaptation.
Telematics Control Module (TCU / Audi Connect)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard or trunk area, varies by year
🔧 VAS 5052/ODIS
⚠️ 2013+ models with Audi Connect. Requires dealer activation and subscription pairing.
Airbag Control Module (ACM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console tunnel, under center armrest or front seats
🔧 VAS 5052/ODIS
⚠️ Crash data must be cleared; component protection may lock replacement. Battery disconnect required.
Fuel Pump Control Module (FPCM)0.8 hr R&Rno coding
📍 Under rear seat or trunk floor, near fuel tank
⚠️ Typically plug-and-play. Some models integrate into ECM control.
Park Distance Control Module (PDC)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear bumper area, left or right side behind trim
🔧 VCDS or Autel
⚠️ Sensor calibration may be needed. Often integrated with camera module on later B8.5 models.
Suspension Control Module (CDC / Damper Control)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left or right side behind trim
🔧 VCDS or Autel
⚠️ Adaptive/sport suspension only. Damper calibration may be needed.
Trailer Control Module (Trailer Module)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left side behind trim
🔧 VCDS or Autel
⚠️ Factory tow package only. Coding enables trailer detection and lighting.
Rear View Camera Module (RVC)0.7 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk lid or rear bumper, integrated with camera
🔧 VCDS or Autel
⚠️ 2013+ B8.5 models. Calibration lines may need adjustment in MMI.
Seat Memory Control Module (Seat Module)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and/or passenger seat
🔧 VCDS or Autel
⚠️ Memory seats only. Calibration of seat position sensors may be needed.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →