01321critical severityNetwork
Airbag Control Module - No Communication
on 1996 Audi A6 2.8L V6 · AWD
What this code means
No data is being received from the airbag control module. Similar to OBD U0151 (Lost Communication with Restraints Control Module).
Symptoms
- Airbag warning light on
- SRS system disabled
- No crash protection ready
Common causes
- Airbag module power or ground fault
- CAN wiring to SRS damaged
- Faulty airbag module
- Water damage under seat/console
Diagnostic steps
- Check airbag module power and ground
- Verify CAN wiring to SRS module
- Scan for related bus faults
- Replace airbag module if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance