P2730high severityPowertrain
Pressure Control Solenoid 'F' Stuck On
on 2000 Audi A6 2.7L Turbo V6 · AWD
What this code means
A transmission pressure control solenoid is stuck in the on position and not responding to commands. This affects hydraulic pressure to the clutches or bands, causing shift problems.
Symptoms
- Harsh or delayed shifts
- Transmission slipping
- Check engine light on
Common causes
- Failed pressure control solenoid F
- Contaminated transmission fluid
- Internal valve body debris
- Wiring or connector fault
Diagnostic steps
- Scan for transmission codes
- Check transmission fluid level and condition
- Test solenoid resistance and operation
- Inspect valve body and wiring
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1