U0420moderate severityNetwork
Invalid Data Received from Ride Level Control Module
on 2000 Audi A6 2.8L V6 ยท AWD
What this code means
Data from the air suspension or ride height control module is corrupted.
Symptoms
- Suspension warning light
- Incorrect ride height
- Vehicle listing to one side
- Compressor cycling abnormally
Common causes
- Height sensor calibration lost
- CAN bus noise
- Module sending incorrect data
- Sensor wiring issue
Diagnostic steps
- Check ride height sensor readings
- Recalibrate suspension module
- Test CAN bus quality
- Inspect height sensor wiring
- Compare actual vs reported ride height
Repair notes
Recalibrate ride height sensors. Check sensor wiring at each corner.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus