P0802low severityPowertrain
Transmission MIL Request Circuit Open
on 2002 Audi A6 3.0L V6 · AWD
What this code means
An open circuit was detected in the line the transmission control module uses to request the malfunction indicator lamp. This can prevent proper illumination of transmission fault warnings.
Symptoms
- MIL may not illuminate for trans faults
- Warning lamp behavior abnormal
- Related transmission codes stored
Common causes
- Open wiring in MIL request circuit
- Corroded or loose connector
- Faulty TCM output driver
- Instrument cluster fault
Diagnostic steps
- Retrieve all stored codes
- Inspect MIL request wiring for opens
- Check TCM and cluster connectors
- Test continuity between TCM and cluster
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1